Safety guarantee of mechanical bending machine
Performance characteristics of the mechanical three roll symmetrical plate rolling machine: The structural type of the machine is a three roll symmetrical type. The upper roll performs vertical lifting and lowering motion at the symmetrical position of the center of the two lower rolls, which is obtained through the transmission of a screw and worm. The two lower rolls perform rotational motion, and the output gear of the reducer meshes with the lower roll gear to provide torque for rolling the plate. The disadvantage of this machine is that the end of the board needs to be pre bent with the help of other equipment.
The maintenance of a mechanical plate rolling machine should pay attention to the following issues: after connecting the power, perform the downward and upward movements of the lower roller and the upward movement of the upper roller, and check whether there is any abnormal jamming phenomenon in each movement. According to the lubrication diagram of the machine, lubricate each oil cup and manual lubrication point as required. Strictly follow the coil processing program and operation method for operation, and pay close attention to the safe operation of the equipment when the upper roller is lifted to the limit position. After the main transmission stops, the lifting and lowering of the upper roller, the tilting and resetting of the flip bearing, and the lifting of the upper roller can be carried out. If any irregular noise, impact or other abnormal phenomena are found during operation, the machine should be stopped immediately for inspection. During operation, all personnel should coordinate with each other and follow the instructions of the person in charge of the rolling board. Without a command, it is prohibited to start the machine. When performing the rolling operation, great attention should be paid to the steel plate pressing down on the hand and rolling it in together with the steel plate. After the rolling process is completed, ensure that all materials are used up and the site is cleaned up, and carry out maintenance work on the equipment, promptly turning off the power.
NanTong HAVI CNC Machinery Co., Ltd.
Phone/WhatsApp: +86 17606524813
Address: Libao Development Area,HaiAn jiangsu China
